General Terms and Conditions
1. Scope
These General Terms and Conditions (“GTC”) apply to all contracts between i-spring Systems AG, with its registered office in Oetwil am See, Switzerland (“i-spring”), and its business customers (each a “Customer”) for the supply, installation and operation of systems for the electronic monitoring of springs and other components, in particular sensors and gateways (“Hardware”), and for related software and data services.
Any differing or additional terms of the Customer apply only if i-spring expressly agrees to their application in writing. This also applies if i-spring performs without reservation despite being aware of such terms.
These GTC do not apply to consumers.
2. Subject Matter of the Contract
i-spring provides services for monitoring the condition of springs and other components and changes in their condition using sensor technology, data transmission and data analysis (the “Services”).
The system consists of sensors mounted directly on the monitored components and a gateway at the Customer’s site that collects and preprocesses the measurement data locally. i-spring accesses the gateway via a secure remote connection.
i-spring is responsible solely for providing the monitoring and analysis Services. It is not responsible for the supply or quality of the monitored components themselves.
Installation, commissioning, training and special analyses are included only if expressly specified in the quotation. Quotations are non-binding unless expressly stated to be binding. A contract is formed when i-spring issues a written order confirmation or begins performance.
3. Role of i-spring and Responsibility for Monitored Products
For legal purposes, the Customer remains the sole manufacturer, distributor or operator of the monitored components and springs. i-spring assumes no responsibility for the design, sizing, selection, assembly, maintenance or operation of the monitored components, equipment or systems.
4. No Guarantee or Warranty for Monitored Components
With respect to the monitored components and springs, i-spring expressly:
- gives no guarantee in the sense of a voluntary assurance of specific characteristics or service life;
- provides no warranty against defects; and
- assumes no responsibility for functionality, service life, safety or fitness for a particular purpose.
All claims relating to defects in the materials or design of the monitored components and springs, or to fatigue, breakage, failure, corrosion, wear or other defects, must be brought exclusively against the relevant manufacturer, supplier or operator. This also applies if the manufacturer is an affiliate of i-spring.
5. Scope of Services, Duty of Care and Role of Forecasts
i-spring provides the Services with the degree of care customary in commercial dealings. It is under no obligation to achieve any specific outcome, including preventing damage, failures or production stoppages.
Measurement data are analysed using the agreed algorithms and models. Adjustments, calibrations and thresholds are agreed with the Customer.
Measurements, condition analyses, remaining useful life forecasts and warnings are decision-support tools. They do not replace the Customer’s inspection and maintenance obligations under applicable laws, standards and operating requirements. i-spring does not warrant that every failure or breakage will be detected or predicted in time.
6. Customer Obligations and Cooperation
The customer is responsible for:
- selecting, designing, qualifying and certifying the monitored components and springs;
- properly assembling, installing, operating and maintaining them in accordance with the manufacturer’s instructions and applicable standards;
- ensuring the completeness and accuracy of the master data, parameters and operating conditions it provides;
- assessing and acting on any guidance, warnings or reports provided by i-spring within the Customer’s own area of responsibility;
- providing power, access for installation and a suitable location for the gateway, as well as an internet connection if i-spring’s mobile data connection is not used; and
- protecting the Hardware at its site against unauthorized access, damage and tampering.
7. Remote Access, Updates and IT Security
Unless otherwise agreed, the gateway normally connects via a mobile data connection provided by i-spring and is not connected to the Customer’s network.
i-spring protects the Hardware, remote access and the platform using state-of-the-art measures, in particular encrypted connections, access controls and signed software updates.
i-spring may remotely install firmware and software updates to maintain or improve security or operation, or to make other improvements, provided the updates do not materially limit the agreed functionality.
The Customer must notify i-spring without delay of any suspected security incident, tampering with the Hardware or damage to the Hardware.
8. Hardware Delivery, Transfer of Risk and Retention of Title
Delivery dates are non-binding unless expressly agreed to be binding. Partial deliveries are permitted where the Customer can reasonably be expected to accept them. In the event of force majeure, shortages in component supplies or measures taken by public authorities, the applicable deadlines are extended by a reasonable period.
Delivery is Ex Works (EXW, Incoterms® 2020). Risk passes to the Customer when the Hardware is handed over to the freight forwarder or made available for collection.
The Hardware remains the property of i-spring until paid for in full. i-spring may register its retention of title in the appropriate register, and the Customer must cooperate in doing so. Under rental or service models, the Hardware remains the property of i-spring.
9. Warranty for Hardware, Software and Services
i-spring warrants that the Hardware is free from defects in materials and workmanship when risk passes to the Customer and that the software, platform and interfaces function substantially in accordance with the service specification.
The warranty period for Hardware is 12 months from delivery.
The Customer must inspect the Hardware immediately upon receipt and notify i-spring in writing of any defects within eight days. Hidden defects must be reported in writing within eight days of discovery. Otherwise, the delivery is deemed accepted.
For valid Hardware defect claims, i-spring will, at its option, repair or replace the defective Hardware. i-spring will remedy software defects that materially impair use within a reasonable time by providing a bug fix, update or workaround. If two attempts to remedy the defect fail, the Customer may request a price reduction or, in the case of a material defect, withdraw from the affected part of the contract.
The warranty does not apply in cases of improper installation by the Customer or third parties, overloading, interference with the Hardware or software, operation outside the specifications or normal wear and tear, particularly of batteries.
Any further warranty claims are excluded to the extent permitted by law.
10. Liability
To the extent permitted by law, i-spring’s liability is limited as follows:
- Liability is excluded for slight negligence, indirect and consequential losses (including, in particular, loss of production, downtime costs, loss of profit and loss of data), and damage arising from defective components or springs.
- i-spring is liable for gross negligence and wilful misconduct in accordance with applicable law.
- Liability is capped at CHF 100,000 per Customer per year.
- i-spring is not liable for damage arising directly or indirectly from mounting, attaching or removing sensors, components or other i-spring systems on or from components, equipment or vehicles, unless i-spring acts wilfully or with gross negligence, or mandatory statutory liability provisions apply.
- These limitations also apply to persons engaged by i-spring to assist in the performance of its obligations.
Mandatory liability provisions, including those relating to product liability and personal injury, remain applicable.
11. Data
11.1 Measurement data
The sensors collect technical operating data from the monitored components, in particular strain, load, vibration, acceleration, temperature and load cycles (“Measurement Data”). Measurement Data are stored and preprocessed on the gateway at the Customer’s site. The system is not designed to collect personal data.
11.3 i-spring’s right to use data
The Customer grants i-spring a royalty-free, perpetual, non-exclusive right to retrieve Measurement Data from the gateway and to store and use those data for the following purposes:
- providing and maintaining the contracted Services and remedying faults;
- developing and improving i-spring’s products, algorithms and forecasting models, including by training AI and machine learning models; and
- producing statistical analyses and benchmarks, including metrics on equipment utilisation, availability, downtime and frequency of faults (“Usage Data”).
11.4 Anonymisation and confidentiality
i-spring discloses Measurement Data and Usage Data to third parties only in anonymised and aggregated form that does not allow the Customer, its site, its equipment, its production volumes or its capacity utilisation to be identified or inferred. This restriction does not apply to i-spring subcontractors who are bound by confidentiality obligations.
11.5 Data products for third parties
i-spring may create aggregated data products from Measurement Data and Usage Data and make them available to third parties for a fee or free of charge. Examples include industry benchmarks, market indicators and reliability statistics. Each such data product must be based on data from at least five mutually independent customers, and no single customer may account for more than 30% of any reported value. The Customer may object in writing, on three months’ notice, to the use of its data for data products made available to third parties. This does not affect use under clause 11.3.
11.6 Results
All rights in anonymised datasets, insights derived from those datasets, and improved algorithms and models belong exclusively to i-spring.
11.7 Personal data
i-spring processes personal data, such as user account details and access logs, in accordance with the Swiss Federal Act on Data Protection and, where applicable, the EU General Data Protection Regulation. The parties will enter into a data processing agreement upon request.
11.8 EU Data Act
To the extent that the EU Data Act applies, this clause 11 constitutes an agreement on the use of non-personal product data within the meaning of that regulation. The Customer’s mandatory access rights remain unaffected.
12. Intellectual Property
All rights in the software, firmware, algorithms, analysis models, platforms, sensor designs, reports and dashboards remain with i-spring.
For the agreed contract term, the Customer is granted a non-exclusive, non-transferable right to use these items to operate the system in its own business operations.
The Customer may not reverse-engineer, decompile, copy or make the Hardware or software available to third parties, except to the extent permitted by mandatory law.
13. Confidentiality
Each party must keep all non-public information of the other party confidential and use it solely to perform the contract. This applies in particular to technical data, designs, prices and operating procedures.
This obligation applies during the contract term and for five years thereafter.
i-spring may name the Customer as a reference only with the Customer’s prior consent.
14. Prices and Payment Terms
The agreed prices apply, including, as applicable, prices for Hardware, setup fees, annual service fees and license fees. Value added tax and charges for packaging, transport and insurance are additional.
Unless otherwise agreed, invoices are payable net within 30 days. Recurring fees are invoiced in advance.
If payment is overdue, the Customer owes default interest at 5% per annum without the need for a reminder. i-spring may suspend the Services or block access.
The Customer may only set off claims that are undisputed or have been established by a final and binding court decision.
15. Term and Termination
Contracts of indefinite duration may be terminated on three months’ notice with effect from the end of a contract year.
Fixed-term project contracts end automatically upon expiry of the agreed term.
Grounds for immediate termination for cause include, in particular, repeated late payment, serious breaches of contract or unlawful use of the Services.
For 30 days after the contract ends, the Customer may export its Measurement Data. After that period, i-spring may delete copies it no longer needs. The right under clause 11 to use data that have already been anonymized and aggregated survives termination or expiry.
16. Export Controls and Compliance
The Customer is responsible for complying with all applicable export control, sanctions and compliance requirements of Switzerland, the EU and the United States in connection with the use of the Hardware and of the monitored components, equipment and systems.
17. Governing Law and Jurisdiction
These GTC and all contracts between i-spring and the Customer are governed exclusively by Swiss substantive law, excluding its conflict-of-laws rules and the United Nations Convention on Contracts for the International Sale of Goods (CISG).
Subject to mandatory statutory rules on jurisdiction, the courts at i-spring’s registered office in Oetwil am See, Switzerland, have exclusive jurisdiction. i-spring may also bring proceedings against the Customer at the Customer’s registered office.
18. Final Provisions
If any provision of these GTC is or becomes invalid in whole or in part, the remaining provisions remain valid. The invalid provision will be replaced by a valid provision that comes closest to its economic purpose.
Amendments and additions to these GTC must be made in writing. Email is sufficient.
In the event of any discrepancy between the German and English versions, the German version prevails.